At Stitchback we believe that the best outdoor gear is the gear you make yourself. Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs.

This listing is for a digital download of a PDF file that includes a full size pattern and over 60 pages of detailed instructions. The pattern is formatted to be printed on letter size paper.

*Note: this listing also includes a PDF of the pattern on (3) A0 pages for large format printing, as well as a separate file specifically for projecting.

*Please note: The hipbelt from the TH40 and 50 packs are not interchangeable with the MK2.

SKILL LEVEL: 5.9

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with some sewing experience.

DESCRIPTION:

The Stitchback Mark 2 or "MK2" takes the best parts of our original TH backpack and adds new features. These features include a forward pull hipbelt and optional belt and shoulder strap pockets, as well as an updated back pocket design.

While the Stitchback MK2 can be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This could be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern also includes men's and women's specific hipbelts and shoulder straps, with instructions on how to customize the fit, and torso length. (Shoulder straps can be positioned up to 24" from the bottom of the pack.)

The pack as shown in the photos, weighs 25 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics and frame sheet used, so this weight is given as a reference only.

FEATURES:

- Large side pockets accommodate liter water bottles

- Large back pocket

- Cord style side compression straps

- Optional lower side compression straps

- Dual daisy chains

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve for frame sheet also holds hydration bladder

- Hydration tube ports

- Lumbar pad

- Forward pull hipbelt w/ optional pockets

- Pattern for men's and women's hipbelt

- Pattern for men's and women's recurved shoulder straps

- Optional, removable shoulder strap bottle pocket

- Pattern for plastic and/or foam frame sheet

- Dry bag style closure

- Top compression strap

- Back panel dimensions: 11" X 24"

- Overall dimensions: approx. 11-1/2"w X 9"d X 26"t

- Volume approximately 45 liters not including exterior pockets

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.9

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with some sewing experience.

DESCRIPTION:

The Stitchback Thru Hiker or "TH" is our flagship ultralight backpacking pack. The TH50 has a volume of approximately 50 liters. The streamlined, yet feature filled design, makes for a very functional pack.

Although the Stitchback TH can be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This could be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern also includes men's and women's specific hipbelts and shoulder straps, with instructions on how to customize the fit, and torso length. (Shoulder straps can be positioned up to 23-1/2" from the bottom of the pack.)

The pack as shown in the photos, weighs 27 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics, and frame sheet used, so this weight is given as a reference only.

FEATURES:

- Large side pockets accommodate liter water bottles

- Large back pocket

- Cord style side compression straps

- Dual daisy chains

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve for frame sheet also holds hydration bladder

- Hydration tube ports

- Lumbar pad

- Pattern for plastic and/or foam frame sheet

- Pattern for men's and women's hipbelt

- Pattern for men's and women's recurved shoulder straps

- Dry bag style closure

- Removable top compression strap

- Back panel dimensions: 11" X 24"

- Overall dimensions: approx. 12"w X 9"d X 26"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.9

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with some sewing experience.

DESCRIPTION:

The Stitchback Thru Hiker or "TH" is our flagship ultralight backpacking pack. The TH40 has a volume of approximately 40 liters. The streamlined, yet feature filled design, makes for a very functional pack.

Although the Stitchback TH can be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This could be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern also includes men's and women's specific hipbelts and shoulder straps, with instructions on how to customize the fit, and torso length. (Shoulder straps can be positioned up to 21-1/2" from the bottom of the pack.)

The pack as shown in the photos, weighs 24 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics and frame sheet used, so this weight is given as a reference only.

FEATURES:

- Large side pockets accommodate liter water bottles

- Large back pocket

- Cord style side compression straps

- Dual daisy chains

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve for frame sheet also holds hydration bladder

- Hydration tube ports

- Lumbar pad

- Pattern for plastic and/or foam frame sheet

- Pattern for men's and women's hipbelt

- Pattern for men's and women's recurved shoulder straps

- Dry bag style closure

- Removable top compression strap

- Back panel dimensions: 11" X 22"

- Overall dimensions: approx. 12"w X 8"d X 24"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.9

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with some sewing experience.

DESCRIPTION:

The Stitchback Metamorph is a shapeshifting backpack that can be customized to the demands of each adventure. A series of strategically placed webbing loops allow pockets, compression straps and other features to be added or reconfigured at will. The base pack itself is minimalistic, but the features that can be added are limited only by your imagination. With the Metamorph you can create a one of kind pack that is truly personalized to your own preferences.

The Metamorph has a base volume of approximately 45 liters. This volume can be increased through the addition of various optional pockets (available separately).

Although the Metamorph can be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This can be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern also includes men's and women's specific hipbelts and shoulder straps, with instructions on how to customize the fit, and torso length. (Shoulder straps can be positioned up to 23-1/2" from the bottom of the pack.)

The pack as shown in the photos, weighs 28 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics and frame sheet used, so this weight is given as a reference only.

FEATURES:

- Strategically place loops allow for customization

- Internal sleeve for frame sheet also holds hydration bladder

- Hydration tube ports

- Lumbar pad

- Pattern for plastic and/or foam frame sheet

- Pattern for men's and women's forward pull hipbelt

- Pattern for men's and women's recurved shoulder straps

- Dry bag style closure

- Back panel dimensions: 11" X 24"

- Overall dimensions: approx. 12"w X 9"d X 26"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.8

A straightforward project, good for those who are new to sewing, and looking to make their first pack.

DESCRIPTION:

The Stitchback "PZ" backpack was designed to be easy to make. In order to simplify the construction of the pack, the design has been stripped down to the bare essentials. The result is a minimalist and streamlined pack.

It features a design similar to our popular EZ backpack, but the PZ utilizes a more common 1 piece design, rather than the separate bag and suspension of the EZ.

Unlike our other backpacking packs, the PZ is a true frameless pack. With no foam frame sheet or hipbelt, it is a pack best suited to the lightest of ultralight loads. The main compartment has a dry bag style closure, and features an inner sleeve that can be used to hold a folded groundsheet or inflatable pad, which will give some structure to the pack. A large 1 piece outer pocket can hold water bottles and other items at the ready.

The pack as shown in the photos weighs 12 oz. The final weight of the pack depends largely on the types of fabrics used, so this weight is given as a reference only.

FEATURES:

- Main compartment with dry bag closure

- Cord style compression straps

- Large outer pocket

- Single top compression strap

- Removable ice axe / trekking pole loop and retainer

- J style shoulder straps with sternum strap

- Approximate dimensions: 11"W x 24"T x 9"D

- Approximate volume: 38 liters

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.9

A straightforward project, good for those with some sewing experience, looking to make their first pack.

DESCRIPTION:

The Stitchback "PZ2" backpack is an upgraded version of our popular PZ backpack. Whereas the PZ was intentionally kept as simple as possible, in order to be easy to make, the PZ2 includes some additional features that improve comfort and function.

The main compartment has a dry bag style closure and features an inner sleeve that can be used to hold a foam frame sheet. A large, elasticized outer pocket is divided into three sections. The two side sections can hold water bottles or other items at the ready, and the back section has enough volume to carry a jacket, or small tarp. The suspension features a unisex unpadded hip belt and S-curved shoulder straps. The pattern includes options for short, medium, and tall torso lengths.

The pack as shown in the photos weighs 19.6 oz. without a foam frame sheet. The final weight of the pack depends largely on the types of fabrics used, so this weight is given as a reference only.

FEATURES:

- Main compartment with dry bag closure

- Cord style side compression straps

- Inner sleeve for foam frame sheet doubles as hydration pocket

- Side bottle pockets with elasticized top

- Back pocket with elasticized top

- Top v compression strap

- Optional ice axe / trekking pole loops and retainers

- Unisex S-curved shoulder straps with sternum strap

- Unisex unpadded hipbelt

- Hydration tube ports

- Approximate dimensions: 11"W x 24"T x 9"D

- Approximate volume: 38 liters

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.10

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with sewing experience.

DESCRIPTION:

The Stitchback Front Loader or "FL" is backpacking pack with volume of approximately 40 liters. A large zippered opening offers easy access to the main compartment. Small zippered pockets inside the front flap, and on top of the pack, allow for additional organization. The pack also features a spacer mesh back panel. These features make it heavier than our TH packs. But it is a good option for those who prefer the convenience of a zippered opening over the roll top opening of the TH, as well as the added comfort of the mesh back panel.

The pack as shown in the photos weighs 37 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics and frame sheet used, so this weight is given as a reference only.

Although the Stitchback FL could be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This could be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern also includes men's and women's specific hipbelts and shoulder straps, with instructions on how to customize the fit, and torso length.

FEATURES:

- Side water bottle pockets

- 4 side compression straps

- Optional bungee lashing system

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve holds frame sheet & hydration bladder

- Optional hydration tube ports

- Lumbar pad

- Spacer mesh back panel

- Pattern for plastic and/or foam frame sheet

- Pattern for men's & women's hipbelt

- Pattern for men's & women's recurved shoulder straps

- Zippered main opening w/ pocket inside front flap

- Zippered top pocket

- Dimensions: approximately 11-1/2"w X 9"d X 24"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.11

This backpack is an advanced project. It utilizes many more parts and pieces than our other pack patterns. The pack requires the use of an internal frame which is made from aluminum and plastic. While the sewing itself is straightforward, the number of parts and steps make it a good option for those who have previous experience in making backpacks.

DESCRIPTION:

Some adventures require more gear than others. The Stitchback "Expedition 60" or EX60 was designed with this in mind. A volume of approximately 60 liters makes it well suited for longer or more gear intensive trips

The EX60 is our most fully featured backpacking pack. It features zippered access to the main compartment in addition to the drawstring opening. Several pockets help with organization, including side bottle pockets, and a lid pocket as well as a removable front pocket that can be converted into a daypack.

The EX60 utilizes a more robust frame and suspension than our other backpacks making it better suited to heavier loads. The frame consists of 2 aluminum flat bar stays and a plastic frame sheet. The stays connect directly to the hipbelt for good load transfer. The shoulder harness has an adjustable torso length and includes the option for men's or women's shoulder straps. The hipbelt is more robust than the hipbelt on our other backpacking packs, and utilizes 2 densities of foam for increased comfort when carrying heavy loads. The pattern includes a men's and women's hipbelt in 3 different sizes.

The pack as shown in the photos, weighs 70 oz. Including the aluminum stays and frame sheet which are required for this pack. The final weight of the pack can vary based on the types of fabrics and hardware used, so this weight is given as a reference only.

FEATURES:

- Adjustable lid pocket with zippered pocket on underside

- Side pockets accommodate liter water bottles

- Removable front pocket converts to daypack

- Side and top compression straps

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve for frame sheet

- Hydration bladder sleeve & tube port

- Adjustable torso length

- Dual density lumbar pad

- Dual density hipbelt - men's & women's pattern included

- Dual density shoulder straps - men's & women's pattern included

- Drawstring main closure with zippered access to main compartment

- Back panel dimensions: 12" X 26"

- Overall dimensions: approximately 12"w X 9"d X 30"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.

At Stitchback we believe that the best outdoor gear is the gear you make yourself.

Our CAD drafted sewing patterns can give you a jump-start on your next myog project. Build the pattern as is, or use it as a launching point and customize it to fit your needs. This listing is for a digital download of a PDF file that includes a full size pattern and instructions. The pattern is formatted to be printed on 8.5x11" paper.

*Note: this listing also includes a PDF of the pattern on 36"x48" pages for those who wish to print the pattern on a large format printer.

SKILL LEVEL: 5.9

Suitable for those confident in their sewing skills. Although this pack has been designed with simplicity in mind, it is still a relatively complex project, good for those with some sewing experience.

DESCRIPTION:

The Stitchback Alpine Start 35, or "AS35" is the first in our series of alpine style packs. With a capacity of approximately 35 liters, it is a good option for gear intensive day trips or minimalist overnighters. A trim, tapered profile, and climbing specific features make it well suited for all types of alpine pursuits.

Although the Stitchback AS35 could be used as a frameless pack, it features both a supportive hipbelt and load lifter straps, making it best used with some kind of frame sheet. This could be a simple piece of foam, or a plastic frame sheet, and the pattern includes instructions for both.

The pattern includes instructions for a sewn in, 1-1/2" webbing belt, as well as a narrow padded hipbelt which can be removed to save weight. It also includes options for men's and women's specific shoulder straps, with instructions on how to customize the fit, and torso length. (shoulder straps can be positioned up to 22" from the bottom of the pack.)

The pack as shown in the photos, weighs 33 oz. without a frame sheet. The final weight of the pack depends largely on the types of fabrics and frame sheet used, so this weight is given as a reference only.

FEATURES:

- Four side compression straps, and a top rope strap

- Bungee lashing system can secure crampons, shovels, or ice tools

- Removable ice axe / trekking pole loops and retainers

- Internal sleeve for frame sheet also holds hydration bladder

- Hydration tube port

- Lumbar pad

- Pattern for plastic and/or foam frame sheet

- Pattern for men's and women's recurved shoulder straps

- Sewn-in 1-1/2" webbing belt with removable padded hipbelt

- Padded hipbelt with optional climbing gear loops

- Drawstring style main closure

- Removable floating lid with zippered pocket on bottom

- Optional bungee cord loops on top of lid

- Dimensions: approximately 10.5"w X 8"d X 27"t

This pattern contains the intellectual property of Stitchback DIY Trail Gear, and is protected by copyright. It may not be distributed, copied or reproduced without express written consent. See our Pattern Use Policy here.